Blueprint · drag to turn
DWG BA-PS-00Profiles & Seals6 productsBlueAnchor
Home/Products/Profiles & Seals
Family 03 of 04

Profiles & Seals

Everything in this family seals a gap. They differ in how the gap is shaped: an extruded profile for a door, a cord for a groove, a sleeve for a roller, an inflatable seal where clearance is needed when open.

6 products · working range −60 to +300 °C

6 products · tap the eye for a quick look
Rubber Profile
01

Rubber Profile

Rubber seals in any shape, made from your drawing or a sample, for doors, ovens and machines.

Seals a door, lid or gapMade to my drawing or sample
Made from
Drawing or your sample
Grades
6 see Silicone Strips
Sections
Any extruded to order
Full details →
Silicone Sleeves
02

Silicone Sleeves

A made-to-size rubber cover for rollers in printing and film-treating machines.

Made to my drawing or sampleElectrical insulation
Max height
1500 mm
Inner diameter
80–1500 mm
Thickness
2 / 3 / 5 mm
Full details →
Silicone Strips
03

Silicone Strips

Rubber strips in any hardness and colour, for sealing and edging.

Seals a door, lid or gapMade to my drawing or sampleVery hot (above 250 °C)
Hardness
10–80 Shore A across grades
Max temperature
+300 °C, peroxide grade
Grades
6 from general to V-0
Full details →
Silicone Cord
04

Silicone Cord

Round or square rubber cord that sits in a groove to seal doors, ovens and lids.

Seals a door, lid or gapMade to my drawing or sampleVery hot (above 250 °C)
Round cord
Ø1–50 mm
Square cord
6–50 mm a side
Grades
6 as Silicone Strips
Full details →
Inflatable Gasket
05

Inflatable Gasket

A seal you fill with air to close tightly, and let down to open easily.

Seals a door, lid or gap
Pressure
4 kg/cm² withstood
Tolerance
±5 % on seal size
Compression set
None not subject to it
Full details →
Sponge Gasket
06

Sponge Gasket

A soft foam seal that keeps water out and cushions parts. Food-safe.

Seals a door, lid or gapTouches food or drink
Hardness
10–30 Shore A
Cell structure
Closed or open
Compliance
FDA 21 CFR 177.2600
Full details →

Compare side by side

The same few facts for every profiles & seals product, so you can see the difference at a glance.

Rubber ProfileSilicone SleevesSilicone StripsSilicone CordInflatable GasketSponge Gasket
In plain wordsRubber seals in any shape, made from your drawing or a sample, for doors, ovens and machines.A made-to-size rubber cover for rollers in printing and film-treating machines.Rubber strips in any hardness and colour, for sealing and edging.Round or square rubber cord that sits in a groove to seal doors, ovens and lids.A seal you fill with air to close tightly, and let down to open easily.A soft foam seal that keeps water out and cushions parts. Food-safe.
Working temperatureOn requestOn request−60 to +300 °C−60 to +300 °COn requestOn request
FormExtruded sectionJointed sleeveStrip or sponge stripRound and square cordInflatable sealClosed or open cell
Hardness—40H–60H10–80 Shore A10–80 Shore A—10–30 Shore A
Typical useClean room and freezer doors, autoclavesCorona treatment, harsh environmentsGeneral sealing across major industriesDoor, oven and autoclave sealsLeak-proof closure that still allows clearancePreventing water and fluid leakage; padding
Rubber Profile
In plain words
Rubber seals in any shape, made from your drawing or a sample, for doors, ovens and machines.
Temperature
On request
Form
Extruded section
Hardness
—
Typical use
Clean room and freezer doors, autoclaves
Silicone Sleeves
In plain words
A made-to-size rubber cover for rollers in printing and film-treating machines.
Temperature
On request
Form
Jointed sleeve
Hardness
40H–60H
Typical use
Corona treatment, harsh environments
Silicone Strips
In plain words
Rubber strips in any hardness and colour, for sealing and edging.
Temperature
−60 to +300 °C
Form
Strip or sponge strip
Hardness
10–80 Shore A
Typical use
General sealing across major industries
Silicone Cord
In plain words
Round or square rubber cord that sits in a groove to seal doors, ovens and lids.
Temperature
−60 to +300 °C
Form
Round and square cord
Hardness
10–80 Shore A
Typical use
Door, oven and autoclave seals
Inflatable Gasket
In plain words
A seal you fill with air to close tightly, and let down to open easily.
Temperature
On request
Form
Inflatable seal
Hardness
—
Typical use
Leak-proof closure that still allows clearance
Sponge Gasket
In plain words
A soft foam seal that keeps water out and cushions parts. Food-safe.
Temperature
On request
Form
Closed or open cell
Hardness
10–30 Shore A
Typical use
Preventing water and fluid leakage; padding

Profiles, strips and cord are all made to your drawing or sample. The tables show the range we work within, not a fixed list of parts.

Ordering is three steps

No account, no checkout. You tell us what you need; we reply with the grade, the datasheet and the price.

  1. 01

    Add to enquiry

    Add every product you are interested in. Not sure? Add your best guess.

  2. 02

    Send it

    Open your enquiry, add the size, quantity and where it will be used, and send it by WhatsApp or email.

  3. 03

    Get a clear quote

    We confirm the right grade and reply with the datasheet, price and delivery date.